• Can-Lite 150 carbon filter plastic lightweight compact | Carbonfilter

Can-Lite 150

The Can-Lite 150 is the most compact carbon filter in the Can-Lite range from Can-Filters, purpose-built for small grow spaces and tents up to 60x60 cm. Delivering 150 m³/h practical capacity at just 1.2 kg total weight, this ultralight filter mounts effortlessly using basic hanging cables in any tent configuration. The 100 percent Australian low-density activated carbon removes up to 99 percent of odours with a guaranteed minimum lifespan of 18 months under normal use conditions. Flange in 100 or 125 mm sold separately for connection to your ventilation system. Washable pre-filter included for effective carbon bed protection and extended service life.

livraison_demain Delivery : tuesday  info_logo

garantie-icon  2 Year Warranty 30 days retour info_logo

Can-Lite 150 Carbon Filter — Maximum Odour Control in Minimum Space

The Can-Lite 150 from Can-Filters delivers professional-grade odour filtration in the smallest footprint of any filter in the Can-Lite lineup. Engineered for micro grow spaces and germination tents up to 60x60 cm, this carbon filter provides 150 m³/h practical capacity from an ABS housing measuring just 25 cm long and 14.5 cm in diameter — compact enough to fit virtually anywhere.

Specifications That Matter

At the core of the Can-Lite 150 sits 0.7 kg of Australian low-density activated carbon distributed across a 2.5 cm bed via Can-Filters' proprietary vibration filling technique. This process ensures uniform carbon distribution without dead spots that would allow unfiltered air to pass through. The 51% open perforation rate on the inner wall delivers maximum airflow with minimum resistance, while the technical capacity of 165 m³/h provides a 10% headroom above the practical rating for consistent performance.

  • 1.2 kg total weight: the lightest carbon filter in the entire Can-Lite range, suitable for suspension from thin tent poles.
  • 18+ month guaranteed lifespan: with regular pre-filter maintenance and humidity levels kept below 70%.
  • Refillable design: replace the carbon charge rather than the entire filter unit to reduce long-term operating costs.
  • Washable pre-filter included: traps dust and pollen, extending carbon bed life by 30 to 50 percent.

Flange and Fan Selection

The Can-Lite 150 ships without a flange. Select either a 100 mm flange or 125 mm variant to match your ventilation system. For optimal performance, pair this filter with a 100 mm inline fan or equivalent operating below the technical capacity of 165 m³/h. Always install in pull configuration — the fan draws air through the carbon bed — for maximum odour control under negative pressure.

Environmental Requirements for Peak Performance

Maintain relative humidity between 50% and 70% for optimal adsorption efficiency. Above 70%, water molecules compete with odour compounds for adsorption sites in the carbon pores, reducing filtration effectiveness significantly. Clean the pre-filter every four to six weeks and replace after eight to twelve wash cycles. Store unused filters sealed in original packaging — activated carbon degrades when exposed to ambient humidity, even without active use. The Can-Lite 150 is also refillable: after carbon exhaustion, remove spent carbon and reload with fresh activated carbon of comparable specification.

From Entry-Level to Expert

The Can-Lite 150 is the ideal starting point for growers entering indoor cultivation who need effective odour management without a significant upfront investment. Its compact dimensions fit virtually any setup — from a small tent in a spare room to a converted cupboard on an upper floor. The refillable design means you replace only the carbon charge after saturation rather than discarding the entire filter housing, keeping your cost per cycle low and your environmental footprint minimal over multiple growing seasons.

Order the Can-Lite 150 at plantandflower.be — your specialist Belgian grow shop. Ordered before 2 PM, delivered tomorrow across Belgium.

Which flange size do I need for the Can-Lite 150?

The Can-Lite 150 accepts both 100 mm and 125 mm plastic flanges from Can-Filters. Your choice depends on your fan and ducting diameter. The 125 mm variant is most popular as it matches the majority of hobby inline fans. Both flanges click into the filter opening without tools and provide a secure, airtight connection.

Can the Can-Lite 150 handle an 80x80 cm grow tent?

An 80x80x160 cm tent has a volume of approximately 1 m³, requiring a minimum airflow of 60 m³/h. The Can-Lite 150 delivers 150 m³/h and technically covers this volume. However, for comfortable headroom during peak flowering odour production, the Can-Lite 300 is a better investment as the filter operates further below its maximum capacity, extending both efficiency and lifespan.

What is the actual lifespan of the Can-Lite 150?

Can-Filters guarantees a minimum 18-month lifespan under normal conditions. With diligent pre-filter maintenance and humidity kept below 70%, many growers achieve 20 to 24 months of effective use. Replace the filter when odours become noticeable despite a functioning ventilation system. The unit is also refillable with fresh activated carbon as a cost-effective alternative to full replacement.