- You cannot place a new order from your country (United States).
search
Reflector Plasma Light
The Plasma Light Reflector is a reinforced open reflector specifically engineered to support the weight of heavy CFL (compact fluorescent) lamps from 125W to 300W with an E40 socket. Its distinguishing feature is a heavily reinforced lamp arm: standard reflectors bend under the weight of 200W and 300W CFL lamps, tilting the bulb away from horizontal and reducing reflector efficiency. The Plasma Light Reflector keeps the lamp perfectly level regardless of weight, for consistent light distribution throughout the grow cycle. Supplied wired and fully assembled. Fast delivery across Belgium from plantandflower.be.
Plasma Light Reflector — Reinforced E40 Reflector for Heavy CFL Lamps 125W–300W
CFL grow lamps in the 200W–300W range pose a structural challenge that standard reflectors are not built to handle. Their integrated ballast and multi-tube construction makes them substantially heavier than HPS and MH lamps of comparable wattage. Over time, a standard E40 arm bends under this load, tilting the lamp away from its ideal horizontal position. The result is degraded reflector performance and uneven light distribution across the canopy. The Plasma Light Reflector is built specifically for this application, with a reinforced E40 socket arm designed to hold any CFL lamp from 125W to 300W perfectly level throughout its service life.
Why horizontal lamp position matters for reflector efficiency
A parabolic reflector is engineered around a precise lamp position: the bulb must sit at the focal point of the reflector's curve to direct light efficiently downward. When the lamp tilts — even by a few degrees — it shifts away from that focal point, and a portion of the reflected light spills outside the intended footprint rather than reaching the canopy. This is not a minor inefficiency: at 200W or 300W input power, even a small angular deviation represents a meaningful loss of usable PAR output. The reinforced arm of the Plasma Light Reflector eliminates that variable entirely. For comparison with standard open reflectors, see the Hamertone Reflector and the Mirror Reflector.
Compatible with all E40 CFL lamps 125W–300W
The ceramic E40 socket accepts the full range of CFL grow lamps available on the market:
- 125W growth spectrum — for propagation, cloning and vegetative stages.
- 200W growth or bloom spectrum — for medium-sized grow spaces.
- 300W dual or bloom spectrum — the heaviest configuration, where arm reinforcement makes the most difference.
The Superplant CFL 125W Grow is a reliable starting combination. Ventilation slots on top of the reflector body dissipate heat from the lamp, protecting the electrical components and extending the lifespan of both the lamp and reflector. For a complete ready-to-use CFL lighting setup, the grow pack lamp eco 125W includes everything needed to get started.
The Plasma Light Reflector is in stock and ships fast to Belgian growers from plantandflower.be. The purpose-built solution for growers who rely on CFL lighting and want every watt performing at its best.
Why does the Plasma Light Reflector have a reinforced lamp arm?
CFL lamps at 200W and 300W are significantly heavier than HPS and MH lamps of equivalent wattage because they include an integrated ballast and a multi-tube lamp body. Standard E40 arms are not rated for this load and gradually bend over time, tilting the lamp away from horizontal and reducing reflector efficiency. The Plasma Light Reflector's reinforced arm is specifically dimensioned to maintain perfect horizontal lamp position under the full 125W–300W CFL weight range.
Does the Plasma Light Reflector require an external ballast?
No. CFL lamps have a built-in ballast and connect directly to mains power — no external ballast is needed. The Plasma Light Reflector is supplied with a mains cable for direct connection to a standard 220V socket. Simply screw the CFL lamp into the E40 socket and plug in. This plug-and-play simplicity is one of the key practical advantages of CFL lighting over HPS and MH systems.
Can the Plasma Light Reflector be used with HPS or MH lamps?
Technically yes, as the E40 socket is universal. However, HPS and MH lamps require a separate external ballast (not included) and the reflector is not optimised for the light output profile of those lamp types. For HPS and MH setups, the dedicated Hamertone or Mirror Reflectors in 50x40cm format are the better choice. The Plasma Light Reflector delivers its strongest advantage specifically with heavy CFL lamps where arm reinforcement is essential.
Which CFL lamps are compatible with the Plasma Light Reflector?
All E40 CFL grow lamps from 125W to 300W are compatible, including growth spectrum (blue, 6400K), bloom spectrum (red, 2700K) and dual spectrum variants from brands such as Superplant and Plasmalight. The reinforced arm is particularly beneficial for 200W and 300W models, which are the heaviest on the market and most likely to cause bending in standard reflectors.
