- You cannot place a new order from your country (United States).
- New
search
search
search
search
search
search
search
search
search
search
Milwaukee Carrying Case PH51 and C66
The Milwaukee PH51 and C66 carrying case bundles two waterproof pen meters into a single, fieldwork-ready kit. The PH51 delivers 0.00 to 14.00 pH readings with 0.01 pH resolution and IP65 protection; the C66 covers 0.00 to 10.00 mS/cm with ±2% full-scale accuracy and IP67 protection. Both pens feature replaceable double-junction electrodes, automatic temperature compensation between 5 and 50°C, and manual calibration via rear trimmer. Supplied with calibration sachets, batteries, screwdriver and a rigid carrying case. Built for serious hobby growers, aquarists and small-scale professional cultivators who need laboratory-grade accuracy in a portable format. Available on plantandflower.be with fast shipping across Europe.
Milwaukee PH51 + C66 Carrying Case for Professional pH and EC Monitoring
Mastering pH and electrical conductivity is the foundation of any serious indoor cultivation, aquarium setup or controlled-environment growing. The Milwaukee PH51 and C66 carrying case bundles two waterproof, professional-grade pen meters into a single, portable kit — the most efficient way to step up from entry-level pens to laboratory-quality measurement. Part of our pH and EC control range, this kit is built for fieldwork, daily reservoir checks and demanding wet environments.
Kit contents and hardware specifications
The case combines the Milwaukee PH51, a waterproof pH pen tester with replaceable double-junction probe (MA73600), 1- or 2-point manual calibration and 0.01 pH resolution across the full 0.00–14.00 range, with the Milwaukee C66, a waterproof high-range conductivity pen with replaceable electrode (MA73076), automatic temperature compensation and 1-point manual calibration. Both pens come with batteries, protective caps and calibration sachets, all stored inside a rigid carrying case.
- PH51 specifications: 0.00–14.00 pH range, ±0.1 pH accuracy, 0.01 pH resolution, IP65 waterproof rating, 2-point calibration capability.
- C66 specifications: 0.00–10.00 mS/cm range, ±2% full-scale accuracy, 0.01 mS/cm resolution, IP67 waterproof rating, ATC between 5 and 50°C.
- Replaceable probes: extend tester life by replacing only the probe (MA73600 for PH51, MA73076 for C66) instead of the entire unit.
- Carrying case included: rigid case keeps both pens, accessories and consumables protected during transport and storage.
- Battery life: approximately 1500 hours for the PH51 and 250 hours for the C66 under continuous use.
Calibration workflow for both pens
Calibration discipline is what separates a useful meter from an inaccurate one. For the PH51, two-point calibration with pH Buffer 7.01 and pH Buffer 4.01 delivers maximum accuracy across the pH range relevant to hydroponics, aquaria and water treatment. For the C66, single-point calibration with EC Standard 1413 µS/cm takes under two minutes. Plan these as recurring consumables in your operating budget.
Use cases for the kit
This bundle targets serious hobby growers who want to outfit their setup in one purchase rather than upgrading piecemeal, aquarists managing freshwater or marine systems where pH and salinity drift are critical, and small-scale professional cultivators who need reliable, portable instruments without the cost of benchtop meters. Educators, agronomists and field consultants benefit from the carrying case format for site visits and on-location testing.
Why bundle over separate purchases
Buying the PH51 and C66 separately, then adding a transport case and starter calibration sachets, ends up more expensive than this integrated kit. More importantly, the rigid case protects the sensitive glass and reference junctions between uses — and a probe left to dry out loses sensitivity within hours, regardless of how well-built the underlying meter is.
The Milwaukee PH51 + C66 carrying case is available on plantandflower.be with fast shipping across Europe — the most complete entry point into professional pH and EC measurement.
What exactly is included in the carrying case?
The case contains the Milwaukee PH51 pH pen and the Milwaukee C66 EC pen, both pre-fitted with batteries and protective caps, plus a calibration screwdriver and starter sachets of pH and EC calibration solutions. The rigid carrying case has dedicated slots for the pens and accessories, designed for transport and long-term storage. Additional calibration solutions are sold separately as consumables.
Is the C66 better than the C65 conductivity pen?
It depends on your use case. The C66 in this kit is a high-range model (0.00–10.00 mS/cm, IP67), making it suitable for concentrated nutrient solutions and marine aquaria. The C65 covers a narrower 0–3999 µS/cm range with IP65 protection, which is sufficient for most hydroponic and dilute applications. For a future-proof kit covering both ends, the C66 is the more versatile choice.
Can I use this kit for both freshwater and marine aquariums?
Yes. The PH51 covers the full pH range including marine values (typically 8.0–8.4 for reef tanks). The C66 reads up to 10.00 mS/cm — sufficient for brackish water and most freshwater conductivity, though full marine seawater (around 50 mS/cm) exceeds its range. For dedicated marine salinity readings, complement the kit with a refractometer or a higher-range conductivity instrument.
How often should I replace the probes?
Both probes typically last 12 to 24 months under regular use with proper care — storage in pH 7 buffer for the PH51 sensor, rinsing in fresh water after each reading for the C66 electrode. Signs of end-of-life include drift between calibrations, slow stabilisation and consistently inaccurate readings. Replacement probes (MA73600 and MA73076) are available as spare parts.