- You cannot place a new order from your country (United States).
search
search
Pipe for Ona Block 125 mm
ONA diffusion pipe Ø 125 mm for integrating an ONA Block directly into your ventilation system. This pipe positions odor neutralization exactly where it delivers maximum impact: inside the airflow of your extraction setup. Designed for grow rooms and grow tents running Ø 125 mm ducting, the standard diameter for compact to mid-sized indoor gardens. The pipe holds the ONA Block in place while forcing air through and around the wax block. Every cubic meter of exhausted air gets treated by the 32 essential oils. Simple tool-free installation between your extractor and carbon filter or as a standalone inline unit.
ONA diffusion pipe 125 mm — inline odor neutralization for your grow room ducting
The ONA diffusion pipe Ø 125 mm converts passive odor neutralization into an active, inline treatment integrated directly into your extraction system. Instead of relying on ambient diffusion from an ONA Block sitting in the room, this pipe places the neutralizer inside the airstream. The result: every cubic meter of air leaving your grow space passes through the ONA Block and gets treated by 32 essential oils that permanently bind and destroy volatile organic compounds (VOCs).
Three scientifically validated mechanisms of action
When air flows through the pipe and across the ONA wax block, three complementary processes activate simultaneously — technology developed over 29 years ago based on the discovery that terpenes permanently eliminate odors rather than masking them:
- Adsorption: VOCs and odor molecules dissolve into ONA's active ingredients at the block surface. Effectiveness depends on the chemical composition of the emission, temperature and pressure within the duct.
- Absorption: ONA's active molecules attract low molecular weight volatile compounds that enter the wax block and form permanent bonds with the essential oils, eliminating the odor irreversibly.
- Pairs Theory (chemical reaction): based on the work of Dutch scientist Zwaardemaker, who demonstrated that two or more odors can cancel each other out through natural molecular bonding. The VOC is permanently transformed into an odorless compound.
This triple mechanism fundamentally separates ONA from air fresheners and ozone treatments. No masking occurs — odor molecules are chemically and physically neutralized.
Optimal placement in your cultivation setup
The Ø 125 mm pipe fits all standard inline fans and carbon filters with 125 mm connections — the default diameter for grow tents from 60×60 up to 120×120 cm. Two recommended configurations:
- Post-carbon filter, pre-extractor: the ONA Block catches breakthrough odors that pass through the filter, especially effective as the filter ages and loses capacity.
- Post-extractor, pre-exhaust: final-stage treatment of the complete airstream before it exits the room or building. Maximum assurance of zero odor impact.
Terpene preservation and correct positioning
Whether ONA essential oils affect plant terpene profiles depends entirely on placement. By mounting the pipe downstream of the grow tent — in the exhaust duct — ONA molecules never contact your plants. They act exclusively on air that has already left the cultivation space. For maximum safety, use an ONA Block Pro in the pipe — the near-odorless variant with the lowest aromatic signature in the ONA range.
Order the ONA diffusion pipe 125 mm from Plant & Flower — fast shipping across Belgium. Complete your ventilation setup with the right extraction and filtration components.
Which ONA Block scent is best for use in the diffusion pipe?
For ducting applications in cultivation setups, the ONA Block Pro is the recommended choice. Its near-odorless formulation after neutralization minimizes the risk of aromatic transfer to plants through potential air backflow. If scent is not a concern, all variants deliver identical neutralization capacity — Polar Crystal and Fresh Linen are the most popular alternatives.
Can the ONA diffusion pipe 125 mm be used without a carbon filter?
The ONA pipe can function standalone, but for plants with significant odor output the combination with a carbon filter is strongly recommended. The carbon filter removes the bulk of odors while the ONA Block handles residual VOCs. As a standalone solution, the pipe suits low-odor plants or serves as a temporary measure while your carbon filter is being replaced.
Does the ONA pipe 125 mm fit all standard inline fans?
The pipe is compatible with all standard Ø 125 mm ducting, inline extraction fans and carbon filter connections. This is the most common diameter for grow tents ranging from 60×60 to 120×120 cm. For larger grow rooms with Ø 150 or 160 mm ducting, choose the ONA diffusion pipe 160 mm. No additional tools or adapters are required for installation.
